Vitamin D Oral Dissolving Film (ODF): From Coating to Single-Sachet Packaging — A Practical Manufacturing Case
Share
This case study walks through a production-ready ODF route for Vitamin D — starting at precision coating and drying, through slitting/die-cutting, and into single-sachet packaging. It excludes liquid preparation and interfaces with your in-house or partner pre-treatment system.
Why this case matters
ODFs for nutraceuticals demand micro-dose consistency, clean edges, moisture-tight packaging, and audit-ready records. By starting at the coating section, we accelerate pilots to mass production without replacing your existing liquid-prep step.
Pain points we solve
- Micro-dose consistency: Map solids → viscosity → coat weight → dry thickness; control web tension and speed to reduce intra/inter-lot variability.
- Appearance & yield: Minimize pinholes, wrinkles, brittleness; ensure flat surface and clean die-cuts.
- Moisture & logistics: Link drying targets with sachet seal integrity to prevent caking/stickiness.
- Rapid changeovers: Fast tool swaps, standardized cleaning/SOPs, parameter recall.
- Traceability: Optional inline checks, batch/barcode printing, and e-records interfaces.
See the live page version for a compact overview: Pain points → controls.
Process route & key control points
A. Precision coating & film formation
Compatible with common aqueous/dispersion film systems (e.g., Pullulan/HPMC or customer-specified). Coating paths are selected per rheology: comma bar, micro-gravure, or slot-die.
Key controls: First-article & in-process checks for coat weight/dry thickness; web guiding and edge control; optional online/offline thickness checks.
B. Drying & curing
Natural hot-air gradient achieves the temperature profile without multi-zone segmentation — balancing energy efficiency and film quality, while simplifying maintenance.
Key controls: Inlet/outlet temp-humidity, exhaust/fresh-air ratio, residual moisture targets to avoid case-hardening or over-drying.
C. Slitting & die-cutting
Dimensional accuracy and clean edges without stringing or edge tearing. Custom shapes/logos supported.
D. Single-sachet/strip packaging & traceability
Formats include single aluminum sachets (optional nitrogen), multi-piece strips, and card displays. Seal integrity testing (peel strength/dye/vacuum decay) can be linked with WVTR/OTR targets and stability.
Related pages: Vitamin D ODF page · Complete ODF Solution · Next-Gen ODF Solutions · Multi-formula Coating (Patented)
Customization & scale-up
- Custom web width sized to capacity, floor space, and budget.
- Dual lanes/layers for high throughput.
- Speed & drying capacity matched to formulation window and drying load.
- Inspection/vision for thickness, surface defects, and print verification (optional).
- Packaging formats from single sachet to strips and carded bundles.
Pricing note: Final price depends on width, lane/layer count, speed, drying capacity, and inspection/traceability options.
Quality & stability focus
CQAs: Appearance; piece weight/thickness uniformity; dispersion/disintegration; micro limits (if applicable); seal integrity; stability (accelerated/long-term/transport).
- Coating: First-article approval + periodic checks; key data logging.
- Drying: Outlet moisture/residuals sampling and parameter curves.
- Packaging: Seal parameters, retention tests, rejects removal & traceability.
Documents (on request): CQA-CPP matrix; SOPs; BMR/BPR templates; FAT/SAT support; IQ/OQ templates.
FAQs
Do we need to replace our liquid-prep system?
No. This solution starts at the coating section and connects to your in-house or partner pre-treatment.
How do we scale throughput?
Wider web plus dual lanes/layers, with drying and packaging takt balanced to avoid bottlenecks.
Will multiple flavors/colors slow changeovers?
We use fast-swap tooling and standardized cleaning/SOPs to keep changeovers within the agreed window.
How do you ensure moisture barrier & seal?
By linking seal-integrity testing with barrier metrics (WVTR/OTR) and stability objectives.
Get the configuration
Share your URS (capacity target, web width, inspection, packaging format), and we’ll return a configuration & quotation list aligned to your validation plan.
Prefer a quick overview? See the page version here: ODF Vitamin D Case Page.